Super Mighty Putty helps to repair almost everything. Absolutely bonds almost any surface! Use for house repairs and to stop leaks. It bonds as well to wet surfaces and can be painted, sanded, machined, tapped or drilled when fully cured.
Repairs almost anything such as metal, wood, tile, glass, wallboard, concrete, PVC, ceramics, brick, auto, crafts.
Justcut, activate and apply Super Mighty Putty to fix, fill or seal almost any surface!
Fill Seal Glue
Adhesive For Wood Metal With Gloves US
Sand it, Paint it, Drill it
Mold to any shape
Mighty Putty has the muscle to support up to 350lbs
How to Use:
Note:Use gloves if you find skin sensitivity
For best results, clean and de-grease surface, then roughen bond area prior to application Twist or cut off required amount. Smaller amounts of putty used and lower temperatures will lengthen hardening and cure times.
To mix, knead thoroughly with fingers to a uniform color (average mixing time is 2 minutes). A quick way to knead the putty is on a hard and clean surface. If tacky on hand, wet hand slightly. Apply to surface to be repaired (within 2 minutes of mixing).
The mixed epoxy does not exhibit high bond strength at this point but appears to be merely lying on the surface.
Force into any cracks or holes to be filled and strike off excess material. On painted surfaces, the bond can only be as strong as the paint bond itself.
When applying to a damp, wet, or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect. For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening Remove excess material before hardening begins.
Once hardening begins, do not handle or reposition. After 30-40 minutes the epoxy will harden and form a tenacious bond After just 60 minutes many items are able to be put back into service
3 Packs (Super Mighty Putty)
Please be expected 2-4 weeks shipping delay due to High Volume of Order